|
|
Pad Printing Ink Characteristics
| CHARACTERISTIC |
INK TYPE (See NOTES at left)
|
SPECIAL
NON-STOCK |
| Abrasion Resistant |
B,B/GL,O,P,R,W,PC,PD,PG,PH,
PL,UVA,UVE,UVN,UVHC |
PK,SUB |
| Alcohol Resistant |
B,B/GL,E,G,O,P,R,W,HS,PC,PD,
PG,UVA,UVE,UVN,UVHC |
C,NK,PK,SUB |
| Chemical Resistant |
B,B/GL,G,O,P,R,U,W,HS,PC,PD,
PH,PL,PM,UVA,UVE,UVN,UVHC |
S,NK,PK,SUB |
| Diluted Acid Resistant |
B,B/GL,P,W,PC,PD,PL,
UVA,UVE,UVN,UVHC |
SUB |
| Diluted Alkali Resistant |
B,B/GL,O,R,W,HS,PC,PD,PL,
UVA,UVE,UVN,UVHC |
NK,SUB |
| Flexible |
411 |
. |
| Food Packagaing Suitable |
O,P,R,HS,PD,PG |
PK |
| Gloss Finish |
B,B/GL,G,J,O,P,R,W,HS,PD,PL,
PM,UVA,UVE,UVN,UVHC |
C, |
| Impact Resistant |
R,HS,PD |
SUB |
| Semi-Gloss Finish |
U,PC,PG,PH,UVA,UVE,UVN,UVHC |
NK,PK |
| Matte Finish |
E,UVA,UVE,UVN,UVHC |
. |
| Mechanical Wear Resistant |
B,B/GL,O,P,R,U,HS,PC,PD,PG,PH,
PL,UVA,UVE,UVN,UVHC |
NK,PK,SUB |
| Oil & Grease Resistant |
B,O,R,HS,PC,PD,
UVA,UVE,UVN,UVHC |
SUB |
| Organic Solvent Resistant |
B,B/GL,E,O,W,HS,PC,PD,PL,PM,
UVA,UVE,UVN,UVHC |
. |
| Packaging, Other |
G,P,PD |
P |
| Permanent Elasticity |
R,PG,PH,PL |
. |
| Perspiration Resistant |
B,B/GL,E,O,P,W,HS,PC,PD,PG,
UVA,UVE,UVN,UVHC |
PK |
| Product Contents Resistant |
B,P,W,PC,PD,PG,
UVA,UVE,UVN,UVHC |
PK |
| Single-Component |
E,G,J,O,P,R,U,HS,PD,PG,PH,PM |
C,NK,PK,SUB |
| Two-Component |
B,B/GL,P,R,W,HS,PC,PH,PL |
PK |
| Single or Two-Component |
P,R,HS,PH, |
PK |
| Ultraviolet Light Resistant |
B,E,O,P,U,PC,PG,PL,PM |
C, NK, PK, PM, UVHC |
| Ultraviolet Light Curing |
UVA,UVE,UVN,UVHC |
. |
| Water Resistant |
B,B/GL,W,PC,PG, |
O,UVHC |
| Weather Resistant |
E,O,U,PC,PG,PH,PL,PN,
UVA,UVE,UVN,UVHC |
C,NK |
| Write-On Capable |
P** |
PK** |
| . |
. |
. |
|
Substrate Compatibility Chart
- Plastics
- Metals
- Coatings, etc.
ITW Trans Tech pad printing inks are compatible with these substrate groups:
- Thermoplastics
- Thermosets
- Metals
- Flexible Plastics
- Coatings & Paints
- Other Materials
- Miscellaneous
- Plastics
NOTES:
§1 : Indicates substrate may require Pretreatment.
§2 : Indicates substrate may require Electrical Surface Treatment (EST or Corona).
§3 : Indicates printed substrate may require Flame Curing.
§4 : Indicates printed substrate may require PP Wipe-On Solution.
§5 : Indicates printed substrate requires heat curing at 204° C (400° F).
|