Ecocure - Pad Printing Ink Curing Tunnel

» Products » Equipment Accessories » Ecocure

Equipment Accessories Anti-Static Equipment Ecocure Infra Red Curing Pad Blowers Plate Washer- Polymer Processing Unit Primocure Programmable Electronic Shuttle Reciprocating Cup Slide Red Star Ink Cups SLD- Special Lapping Disk Space Frame - Express Liner Ink Cups Two Position Dial Indexer Contact Us >Request a Quote	Pad Printing Ink Curing Tunnel Economical Design Accelerates Ink Curing Controllable Temperature ECOCURE ink curing tunnel from ITW Trans Tech is an economical unit ideal for curing pad printing inks, especially two-component inks using hardeners. The combination of direct radiant heat with air passing through the panel provides a heat transfer that performs well in rapid drying and minimizes production time in smaller pad printing operations. Heat curing with this unit is an effective method for accelerating ink drying on pad printed parts so that they may be handled or packed without damage. Main Features & Benefits: Sturdy Design: The support structure is an efficient steel design with powder-coated finish. Four legs with casters enable convenient positioning and easy mobility. Fine Mesh Belt: The heat-resistant mesh curing belt is thirteen inches wide with its speed variably controlled from zero to twelve feet per minute. Heating Chamber: To assure the best curing efficiency, the heating chamber is fully insulated. Heating panel is height-adjustable; entry and exit sides of the tunnel are also adjustable with height gate openings from one to five inches. Temperature Control: The temperature is controlled by a solid-state thermostat. Blower: A blower unit is mounted on the top side of the heat chamber for even heat distribution with a capacity of 210 cubic feet per minute. Chute: The twelve-inch long galvanized steel part chute at the end of the conveyor belt allows for proper part unloading. Control Panel: All operating controls are easily accessible and mounted on the outside of the blower unit. Outfeed view of Ecocure showing adjustable chute. View Our complete line of pad printing inks View More Pad Printing Equipment Accessories	TECHNICAL DATA: ECOCURE Pad Printing Ink Curing Tunnel Part Number: 10000214 Belt Width: 13 in., fine mesh Belt Speed: variable from 0–12 feet per minute Temperature Control: adjustable, solid-state Oven: 1800w, 24 x 6 in. panel, adjustable; fully insulated Air Flow: 210 cfm directed through heating panel Oven Entrance & Exit Gates: adjustable heights from 1.0 to 7.5 in. Exit Chute: galvanized steel with adjustable angle; length 12 in. with flanges. Dimensions: overall conveyor length 76 in.; width 18 in.; overall height 52.5 in.; infeed 20 in.; outfeed 28 in.; oven section 28 in. Weight: 100 lbs. Power Requirement: 120v AC; 1.8kw Ecocure Curing Tunnel User Manual Adobe Acrobat Reader Required We reserve the right to make changes to technical specifications and features without prior notice. PAD PRINTING INKS HEAT CURING TIP: To determine initial curing settings, expose a stationary part to heat source. Slowly increase temperature until part starts to melt or ink discolors. Note temperature and reduce by ten percent. Adjust time that part is exposed to heat to obtain desire cure. Learn More About Pad Printing Inks & Additives
	475 North Gary Avenue Carol Stream, IL 60188-4900 Phone: (630) 752.4000 Fax: (630)752.4460