Trans Tech On-Demand
ColorSolv LT™ Mild Solvent Inkjet Inks

Technical Data Sheet

Product Description
CMYK, White and Clear inkjet ink platform is engineered for use in piezoelectric, drop-on-demand print heads. These inks provide good adhesion to recommended substrates. The ink set is capable of producing high resolution detailed images with consistent printing and processing characteristics.

Products
• ColorSolv LT™ Cyan
• ColorSolv LT™ Magenta
• ColorSolv LT™ Yellow
• ColorSolv LT™ Black
• ColorSolv LT™ White
• ColorSolv LT™ Clear

Typical Physical Properties
Viscosity @ 25°C 3– 4 cps
Surface Tension @ 25°C 24 – 25 dynes/cm

Advantages
• Adhesion to multiple substrates
• Vibrant with high color density
• Expanded color gamut
• Consistent color density values
• Use with both rigid and flexible substrates
• Abrasion resistance
• Filtered to eliminate clogging

Evaluated Print Heads
Epson

Recommended Substrates
Glass, Aluminum, Ceramic, Acrylic, Polyvinyl Chloride (PVC), Polycarbonate (PC), Lacquered Wood, Leather, Paper, Crystal and other materials.

Recommended Flush
TransJetTM Wetting Solution

Drying / Curing
The inks will air cure at room temperature and should be handled carefully for up to five minutes after printing. Forced air and/or elevated temperature will dramatically accelerate drying time. Full cure and durability should be considered only after 24 hour period. Further recommendation on obtaining best cure could be provided depending on the end users application.

Storage Conditions
Store the inks between 18 to 27°C at a relative humidity from 20 to 50% in a non-condensing environment. Ink should be stored away from direct sunlight. Keep away from heat, sparks, and flame. Always allow the ink to return to room temperature before use. Care should be taken so as not to introduce any air bubbles into the ink. The shelf life of this product is 12 months from the date of purchase when stored under prescribed conditions.

Other Related Products
• TransJet™ Wetting Solution
• TransJet™ Solvent Wash
• TransJet™ Pretreatment Fluid
 

 
DISCLAIMER
The information provided herein was believed by Trans Tech to be accurate at the time of preparation or prepared from sources believed to be reliable, but it is the responsibility of the user to investigate and understand other pertinent sources of information, to comply with all laws and procedures applicable to the safe handling and use of the product and to determine the suitability of the product for its intended use. TRANS TECH MAKES NO WARRANTY, EXPRESS OR IMPLIED, CONCERNING ANY PRODUCT OR THE MERCHANTABILITY OR FITNESS THEREOF FOR ANY PURPOSE OR CONCERNING THE ACCURACY OF ANY INFORMATION PROVIDED BY TRANS TECH, except that the product shall conform to contracted specifications, and that the product does not infringe any valid United States patent.