 |
||||||||
 |
 |
 |
 |
 |
 |
|||
|
|||||||||||||||||||||||||||||||||||
|
INSTRUCTIONS: NOTE: Read Material Safety Data Sheet (MSDS) Prior To Use Ink Type PG is a single-component product supplied in paste form. Thinner ( if needed ) should be thoroughly mixed with the ink prior to using. During printing, the ink viscosity may be adjusted with thinner (if needed). A retarder may be added to slow drying rate during printing (normally for high room temperatures or multi-color use). Recommended room temperature: 70-78 degrees F. Recommended room humidity 30-50 % ADDITIVES: (See Additives Chart for more listings) Thinners: THINNER B (5 to 20 % by weight) Faster (Recommended for most applictions VD THINNER (5 To 20 % by weight) Medium THINNER BGA (5 To 20 % by weight) Slower Retarder: TPD RETARDER (1 To 3 % by weight) DRYING & CURING: (See Ink Drying & Curing Times Chart ) Ink TYPE PG dries to the touch within 15 – 30 seconds at room temperature. Drying time may be reduced with forced hot air at 200 – 400 degrees F. Normally, full cure is achieved after two to three days depending on curing temperature time; and humidity. Heat curing is necessary for better adhesion and performance results. COLORS: (See Color Availability Chart ) Ink Type PG is available in: • 23 Standard Opaque Colors • Standard Metallic Colors • Process colors • Custom Colors Available Upon Request • C-Mix 2000 Color Matching System  Type PG Ink is Certified Class VI Medical Grade. PDF of Certificate NT (non-toxic) Inks Our NT Series Inks conform to US C.O.N.E.G. Legislation and European Standard EN 71, part 3 Safety of Toys (1989) For special applications - examples, Medical. Automotive; MIL-STD please contact us. Medical Class VI Certification: Type PG Ink Black For a printable PDF of the official certificate, click here. USE & STORAGE INFORMATION (For more detailed information see Material Safety Data Sheet (MSDS) for Type PG Ink. Ink Type PG: Stir ink thoroughly before removing from container. Reseal lid tightly after using. Shelf Life: Two years (in original sealed container) THINNER: Reseal lid tightly after using. Shelf Life: two years (in original sealed container) RETARDER: Reseal lid tightly after using. Shelf Life: two years (in original sealed container) STORAGE OF ALL PRODUCTS: At room temperature 60 to 80 Degrees F with low humidity. Ink Type PG: Recommended Printing Substrates Ø : Indicates substrate may require flame curing. # : Indicates substrate may require pretreatment.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
