ITW Trans Tech: Special Lapping Disc for Sealed Ink Cups



	TECHNICAL DATA: SLD Special Lapping Disc for Professional Lapping of Ink Cups # 1411331 • Lapping & polishing of ink cup rings extends productivity. • Unit is easy to use and increases lifetime of ink cups. • Professional quality lapping is economical using convenient unit•and step-by-step technique. See step-by-step instructions at right. *Download PDF of instructions here.* Need more information? Call your Consumables representative at: 630-752-4000 or e-mail us! We reserve the right to make changes to technical specifications without prior notice.

SLD
Special Lapping Disc
For Sealed Ink Cups

Extends Lifetime of Ink Cups

Improves Print Quality

Increases Productivity

Step-By-Step Instructions
How to use the Trans Tech SLD Special Lapping Disc to lap ink cups:

A. Open storage case and clean SLD disc with paper towel.

B. Squeeze desired amount of diamond paste (1/2 scale line) by turning knurled ring in diamond paste container.

C. Coat SLD disc with paste using diamond paste container.

D. Slightly moisten diamond film with SLD spray fluid.

E. Put clean ink cup on SLD disc. On ink cups with integrated magnets, take magnet out first.

F. With slight hand pressure, move ink cup over disc using pattern as shown below, first in small movements, to distribute diamond paste.

G. Continue as in step F, but with larger movements back and forth from one side of disc to the other. After 20 to 30 seconds of this process, ink cup will be relapped, polished and ready for use.

H. Clean ink cup and SLD disc after completion of lapping and polishing procedure and close case for storage. Should the SLD disc become dislodged, it can be refastened by tightening screw located on bottom of case.

For further details about how the SLD Special Lapping Disc can be used to improve the productivity of your pad printing operation, feel free to CONTACT US

Complete Pad Printing Solutions:
www.itwtranstech.com