 |
||||||||
 |
 |
 |
 |
 |
 |
|||
 Long Life Oil (#141112) 16 fluid ounce dispenser bottle LONG LIFE OIL prolongs the life of silicone rubber transfer pads while promoting excellent ink transferability. When applied properly, it replenishes the silicone oil to the pad body that normally becomes lost during printing operations. This is an ideal product for short & long term pad storage.  Cliché Spray (#141110) 15 ounce spray can CLICHE SPRAY dissolves dried ink in the etched areas of cliché printing plates, on the ink cup assembly, fixtures or any other machine component surface. Since cliché spray does not contaminate the ink, it becomes an excellent tool for restarting the printing operation after long periods of idle time.  Pad Cleaner (#1411121) one quart dispenser bottle PAD CLEANER is designed for the proper cleaning of silicone rubber transfer pads. It safely removes dust, dirt, ink & other contaminants while prolonging pad life. Pad cleaner minimizes excessive silicone oil removal from the pad body. Use before, during & after printing operations as required.  Anti-Corrosion Spray (#141111) 12 ounce spray can ANTI-CORROSION SPRAY protects printing cliché plates from corrosion by forming a protective film coating. This prevents moisture from oxidizing the polished steel surface. Excellent for short or long term plate storage, it can be removed easily with conventional cleaning solvents, such as Cliché Spray.  Synthetic Cleaner & Ink Remover (#120403) one-liter can SYNTHETIC CLEANER & INK REMOVER is a cost-effective way to eliminate or greatly reduce the waste of rejected or misprinted parts. This cleaner is designed to safely remove ink from printed parts without attacking or damaging most substrate materials. Cleaner can be used immediately after pad printing or, in some cases, after the ink is fully cured.  Plastic Squeeze Bottles with Spouts Available in these sizes: 8 ounce (#1410166), and one-quart size with three possible spout colors: yellow (#1410167), blue (#1410172), and red (#1410173). PLASTIC SQUEEZE BOTTLES WITH SPOUTS have been developed to provide a safer method of dispensing solvents directly onto small components or sub-assemblies with a minimum of overspray or spillage. Squeezing the body of the bottle produces a fine stream of liquid from the narrow, angled spout. Made of low-density polyethylene, these versatile dispensers are useful items in any pad printing shop.
|
|||
 |
|||
| Basic Supplies Checklist Lab-Tested for the Special Demands of Industrial Pad Printing Operations  Highest Quality Easy Maintenence Highest Productivity• Long Life Oil • Cliché Spray • Pad Cleaner • Anti-Corrosion Spray • Synthetic Cleaner & • Ink Remover • Squeeze Bottles To get more information, call us at 630.752.4000 or click here to e-mail your Consumables representative!
Note: We reserve the right to make changes to technical specifications without prior notice. |
|||
