Please click on the product type below to view the data sheet for that product.

Pad Print Pad Printing Ink Types

411 - Pad Printing Ink Type 411 is designed for pad printing on silicone rubber parts.

417 -  Pad Printing Ink Type 417  is a glossy, two component, opaque, fast drying ink.  When fully cured, it provides outstanding resistance to:  Abrasion / Chemicals / Diluted Acids / Diluted Alkalis / Mechanical wear / Oil & Grease / Organic Solvents / Perspiration / Product Contents.  (See back side of sheet for recommended substrates)

434 - Pad Printing Ink Type 434 is a high speed, single component ink formulated for un-treated Polypropylene.

B Pad Printing Ink Type B is a two-component product supplied in paste form. Hardener must be added for production use. Ink and hardener should be thoroughly mixed prior to adding thinner. During printing, the ink viscosity may be adjusted with thinner (if needed).

B/GL - Pad Printing Ink Type B/GL is a two-component product supplied in paste form. Hardener must be added for production use. Ink and hardener should be thoroughly mixed prior to adding thinner.

G  Pad Printing Ink Type G is a single-component product supplied in paste form. Thinner ( if needed ) should be thoroughly mixed with the ink prior to using. During printing, the ink viscosity may be adjusted with thinner (if needed).

HS  Pad Printing Ink Type HS is a single or two-component product supplied in paste form. In most applications hardener is not required unless additional adhesion is needed for glass substrates.

O   Pad Printing Ink Type O is a single-component product supplied in paste form. Thinner ( if needed ) should be thoroughly mixed with the ink prior to using.

P Pad Printing Ink Type P is a single or two-component product supplied in paste form.

PC  - Pad Printing Ink Type PC is a two-component product supplied in paste form. Hardener must be added for production use. Ink and hardener should be thoroughly mixed prior to adding thinner. During printing, the ink viscosity may be adjusted with thinner (if needed).

PG  -  Pad Printing Ink Type PG is a single-component product supplied in paste form. Thinner ( if needed ) should be thoroughly mixed with the ink prior to using. During printing, the ink viscosity may be adjusted with thinner (if needed). A retarder may be added to slow drying rate during printing (normally for high room temperatures or multi-color use). Recommended room temperature: 70-78 degrees F. Recommended room humidity 30-50 %

PH Pad Printing Ink Type PH is a single or two-component product supplied in paste form.  Single Component: Thinner (if needed) should be thoroughly mixed with the ink prior to using. During pad printing, the ink viscosity may be adjusted with thinner.

PK  -  Pad Printing Ink Type PK is a one or two-component product supplied in paste form. Hardener must be added for production use. Ink and hardener should be thoroughly mixed prior to adding thinner. During printing, the ink viscosity may be adjusted with thinner (if needed).

PL  -  Pad Printing Ink Type PL is a two-component product supplied in paste form. Hardener must be added for production use. Ink and hardener should be thoroughly mixed prior to adding thinner. During pad printing, the ink viscosity may be adjusted with thinner (if needed).

PM  -  Pad Printing Ink Type PM is a single-component product supplied in paste form. Thinner ( if needed ) should be thoroughly mixed with the ink prior to using.

PV  -  Pad Printing Ink Type PV is a two-component product supplied in paste form. Hardener must be added for production use. Ink and hardener should be thoroughly mixed prior to adding thinner.

R- Pad Printing Ink Type R is a one or two-component product supplied in paste form. Increased product resistance can be expected when used as a two component system.

SK   For pad printing on rubber, leather, imitation leather, polyamide and polyurethane, elastomers (TPE, Santoprene), soft-touch coatings.

U Pad Printing Ink Type U is a one-component product supplied in paste form. During printing, the ink viscosity may be adjusted with thinner (if needed). A retarder may be added to slow drying rate during printing (normally for high room temperatures or multi-color use).

UV2002  -  Pad Printing Ink Type UV2002 is an Ultra Violet curable ink.  Normally, after proper exposure to UV light, immediate testing can be performed.  When fully cured, it provides outstanding resistance to:  Abrasion / Oil & Grease / Alcohols / Organic Solvents / Chemicals / Perspiration / Diluted Acids / Salt / Diluted Alkalis / Hand Creme / Water / Impact / Weather / Mechanical wear.

UVA- Pad Printing Ink Type UVA is supplied in a paste form. The ink is formulated for open ink well & sealed ink cup systems. Recommended cliché depth for pad printing is 24 microns. The ink has a printable range between 20 to 30 microns, depending on application.

UVE  Pad Printing Ink Type UVE is supplied in a liquid form. The ink is formulated for sealed ink cup systems. Recommended cliche depth for pad printing is 25 microns. The ink has a printable range between 18 to 28 microns, depending on application.

UVHC- Pad Printing Ink Type UVHC is supplied in paste form. This ink is recommended for open ink well and sealed cup pad printers

UVN  Pad Printing Ink Type UVN is supplied in a liquid form. Recommended cliche depth for pad printing is 25 microns. The ink has a printable range between 18 to 28 microns, depending on application. The ink can be applied single or double hit.

W  Pad Printing Ink Type W is a two-component product supplied in paste form. Hardener must be added for production use. Ink and hardener should be thoroughly mixed prior to adding thinner.

Learn More About Pad Printing Ink Products From ITW Trans Tech